A complete guide on how to clean a single tube washing machine

 

How to clean a single tube washing machine

You run water and washing detergent in your washing machine regularly. Does it mean it’s clean? Not necessarily.

Like any other home appliance, your washing machine needs a deep clean so it performs at its best for longer. Otherwise, mould and mildew may grow in its damp crevices, causing both your machine and laundry to smell.

As a rule of thumb, thoroughly clean it at least once a month depending on your washing habits. Whether for a front-loader or a top-loader, refer to this step-by-step guide on how to clean a single tube washing machine from Electrolux Indonesia:

Preparation before cleaning your washing machine


The process, on average, will take about three hours, but most of it is just waiting for the cycles to finish. Here are the materials you need:

  • Microfibre cloth
  • Warm soapy water
  • Small brush
  • Spray bottle
  • Washing machine cleaner. This is your best option since it’s specially formulated to do the job without causing damage to your appliance.

How to clean a front load washing machine 


For each step, focus on one area.

1. Drum


Make sure no clothes are left inside before you start. Follow the instructions of the washing machine cleaner you have. This may come in a form of a tablet, powder, or liquid that you’ll have to load directly in your drum or detergent dispenser.

You can then run your front load washing machine on a normal cycle with hot water. Some Electrolux washing machines also have dedicated cleaning programmes like Tub Clean or Clean Washer. When the cycle ends, wipe the drum so no residue is left.

How to clean Electrolux front load washing machine

How to clean Electrolux front load washing machine

2. Pump


Water may be collecting in your drain and filter, potentially harbouring germs. When the cycle is finished, unplug your machine, then look for a small panel on its lower front portion. Ready towels or a tray underneath to contain the water. Open the panel and unscrew the dial slowly to control water as it flows out.

3. Pump filter


Completely unscrew the cap, inspect both the filter and drain, then remove any foreign objects clogging them such as lint or forgotten objects from pockets. If left unchecked, this could cause excessive vibrations and long cycle times. Run the filter through warm water and scrub with a small brush.


How to clean Electrolux front load washing machine

How to clean washing machine filter

4. Gasket and door


For owners of front loaders, it’s also important to know how to clean the rubber gasket the right way.

Soap and water residue in the rubber gasket combined with the warm environment inside your machine, is the perfect breeding ground for mould and odours.

While the washing machine cleaner should have cleaned this, it’s best to check again. For a more thorough clean, spray hot soapy water on the gasket, gently pulling back the folds to really get in there, then wipe with a clean cloth. Include the inside of the door too.


How to clean the rubber seal of front door on washing machine

How to clean the rubber seal of front door on washing machine

5. Detergent dispenser


Overtime, detergent can build up in the crevices of your dispenser, causing blockage. To clean it, gently remove the drawer. One long tray should easily slide off. Separate all the removable inserts, and soak them in warm soapy water. Scrub off all residue to make sure they’re squeaky clean, and then wipe dry. Before returning it, use a brush or cloth to make sure the drawer cavity is free of any powder residue.

6. Exterior


Finish off by wiping down the machine exterior and controls using a damp cloth. Now your machine is spotless inside and out.

>>> Read more:

How to clean a top load washing machine


For each step, focus on one area.

1. Tub


How to clean washing machine tube properly is a common concern of top loader users.

Check if there are any forgotten items left inside. Simply follow the instructions of the washing machine cleaner. Most likely, you’ll have to load it directly into the tub. You can then set your machine to a normal cycle with hot water.

You may notice the water getting dirty. That’s because of the buildup of gunk underneath the inner drum. Let it drain and wipe the tub to make sure no residue remains.

>>> Read more: 6 differences between Single tub washing machines and Twin tub washing machines

2. Detergent dispenser


Gently slide off the detergent dispenser then soak in warm soapy water. Give it a good scrub so no residue remains. Brush the inside of the drawer compartment too.

3. Door


Using warm soapy water, scrub around the edge and the inside of the machine door. If your top load washing machine has an agitator, wipe its top too. These areas will have less grime because water usually drips down. Rinse with water afterwards.

4. Exterior


Don’t forget the outside of your machine. Wipe its controls and the rest of its body using a damp microfibre cloth to remove dust, grime, and drips of laundry product. Take care not to use any harsh chemicals or any abrasive material to maintain its coat.

Refer to the below tutorial video on how to clean your Electrolux front load washing machine:


5. Clean machine = clean clothes


Now you know how to clean an automatic washing machine. The key is to choose a washing machine with a self-cleaning feature like the Electrolux 12.5kg top load washing machine  EWT2H88M1SB from our UltimateCare 300 series with Tub Clean feature. Other top loaders also add an extra layer of hygiene like the Electrolux 11kg UltimateCare 700 front load washing machine EWF1142Q7WB with HygienicCare that removes 99.9% of germs in clothes.

See below our range of Electrolux washing machines with Tub Clean or HygienicCare features for your reference:

Sale
  • CyclonicCare gives gentle yet powerful cleaning
  • Prism Drum minimizes friction and tangling
  • Inverter motor is quiet, efficient, and durable.
  • SensorWash with AI removes 49 different visible stains*.
  • No more visible detergent residue with UltraMix*.
  • HygienicCare removes 99.9% allergens and germs*.
  • No more visible detergent residue with UltraMix*.
  • HygienicCare removes 99.9% allergens and germs*.
  • EcoInverter motor uses 50% less energy*.

Additional tips on keeping your washing machine fresh smelling for longer

 
Follow these 5 easy tips to make the fresh smell last longer on your beloved clothes:

  • Before every wash, give your clothes a thorough going over before putting them in to remove loose coins, tissue or paper from pockets. Shake off excess dirt from heavily soiled garments.
  • After the cycle finishes, immediately take the clothes out.
  • After washing, immediately wipe the rubber gasket, and keep the door and drawer ajar to dry out the interior and prevent moulds and odours.
  • Occasionally use a water softening powder to slow limescale buildup.
  • Use only the correct amount of detergent and softener for your load. Otherwise, you risk damaging your clothes and leaving more residue in the drum. Most Electrolux washing machines have an AutoDose feature that helps you measure based on your load so you get it right every time.


Hopefully, this post from Electrolux Indonesia has provided you with helpful tips on how to clean your washing machine, be it a front loader or a top loader. Know how to use your washer properly and keep it always clean & hygienic is the key to make you laundry machine last longer and also need fewer repairs. Visit our website for more expert advice to take better care of your home appliances.

Purchase

    Purchase In-Store

    0804 111 9999